manualshive.com logo in svg

SCUBAPRO-UWATEC Chromis, Руководство пользователя

Поделиться
Скачать
SCUBAPRO-UWATEC Chromis Скачать руководство пользователя страница 25

25

English

CHROMIS USER MANUAL

By pressing the SEL button the following 
menu’s can be accessed.

4.4.1 

Setting the dual depth alarm

By pressing the SEL button at this menu 
the on/off selection starts blinking. By 
pr or - button this can be edited 
and confi rmed by pressing SEL button. 
After that the fi rst depth starts blinking. 
By pr or - buttons you may select 
the fi rst depth alarm from 5 to 100 meters 
(20..330 feet). By pressing SEL the fi rst 
value is confi rmed and the second depth 
starts blinking. Like the fi rst, by pr 
or - buttons the second depth alarm may 
be set from 5 to 100 meters.

 

NOTE: The fi 

rst alarm is short 

sequence for attention and the second 
alarm is continuous. By setting the fi rst 
alarm deeper than the second, it will 
be masked by the continuous alarm 
and you cannot hear the fi rst one.

4.4.2 

Setting the depth 
incremental alarm

By pressing the SEL button in this menu 
the incremental mode starts blinking. By 
pr or - the you may scroll between 
the direction of the alarm or disable it with 
selections: off, dn(down), up or both. After 
confi rming the selection with SEL button 
the alarm depth starts blinking. By pressing 
+ or - buttons you may select the alarm 
value from 5 to 100 meters (20..330 feet). 
By pressing SEL button the alarm value will 
be confi rmed.

4.4.3 

Setting the dive time interval 
alarm

By pressing SEL button at this menu the 
function starts blinking and you may enable 
or disable it by choosing on/off with + or 
- buttons. After confi rming by pressing 
the SEL button the time starts blinking. By 
pr or - you can select the interval 
from 15 seconds up to 10 minutes. By 
pressing SEL again the selection will be 
confi rmed.

Содержание Chromis
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды