SCT SCT-2700WNR Скачать руководство пользователя страница 6

Страница: 6 / 154

Important Health Information and

Safety Precautions

When using this product, the safety precautions below must be taken to avoid possible

legal liabilities and damages. Retain and follow all product safety and operating

instructions. Observe all warnings in the operating instructions on the product.

To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment,

observe the following precautions.

ELECTRICAL SAFETY

This product is intended for use when supplied with power from the designated

battery or power supply unit. Other usage may be dangerous and will invalidate any

approval given to this product.

SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT



Use the correct external power source

A product should be operated only from the type of power source indicated on

the electrical ratings label. If you are not sure of the type of power source

required, consult your authorized service provider or local power company.

For a product that operates from battery power or other sources, refer to the

operating instructions that are included with the product.



Handle battery packs carefully

This product contains a Li-ion battery. There is a risk of fire and burns if the

battery pack is handled improperly. Do not attempt to open or service the

battery pack. Do not disassemble, crush, puncture, short external contacts or

circuits, dispose of in fire or water, or expose a battery pack to temperatures

higher than 60

C (140

F).

WARNING:

Danger of explosion if battery is

incorrectly replaced. To reduce risk of fire or

burns, do not disassemble, crush, puncture,

Содержание SCT-2700WNR



























































































































































Результаты поиска

Содержание SCT-2700WNR

Отзывы:

Похожие инструкции для SCT-2700WNR

Бренды по названию

Популярные бренды

SCT SCT-2700WNR, Руководство пользователя

Результаты поиска

Содержание SCT-2700WNR

Отзывы:

Похожие инструкции для SCT-2700WNR

Бренды по названию

Популярные бренды