Document# SCT-UM2A61VC
Page 5 of 11
Connect any RF cables between the SC2444 and external test equipment as required (See section 4.3 and 4.4
for further details).
CAUTION: Apply external signals only while the SC2444 is powered on. Applying external signals while the
device is powered off may cause damage.
CAUTION: The 2.4 mm connectors look very similar to SMA connectors. However, the two types are not
mechanically compatible. Damage will occur if an attempt is made to mate an SMA connector to 2.4 mm
connector or vice versa.
Connect the AC mains power cord (not included) to the 12V AC/DC adapter and to an AC mains outlet. Ensure
the outlet is properly grounded.
Connect the USB Type C cable between the SC2444 and host computer (See section 4.2 and section 5.1)
Apply power to the SC2444 by plugging in the barrel connector from the 12V AC/DC adapter to the power input
of the SC2444.
