background image

40

Limited Warranty

SCS warrants its Dura-label

 

to be free from defects in workmanship and materials, under

normal use and service, for a period of ninety (90) days from receipt of products.

SCS warrants its Scanner to be free from defects in workmanship and materials, under

normal use and service, for a period of 1 year from date of receipt.

If a product does not operate as warranted during its applicable warranty period, SCS

shall, at its option, repair the defective product or deliver to Customer an equivalent

product to replace the defective item. All products that are replaced shall become the

property of SCS. Replacement products may be new or reconditioned. The warranty for

replacement or reconditioned product is the same as the equivalent newly purchased

product.

SCS reserves the right to refuse to warranty repair any product that has been subjected to

any abnormal electrical, mechanical, or environmental abuse.

FCC Part 15 Compliance

The FCC has established rules that permit the scanner and tag

 

system to be used within

acceptable bounds of radio frequency emissions. Your scanner and tag system complies

with Part 15 of the FCC Rules.

Operation of the Scanner and Label

 

system is subject to the following conditions: This

device may not cause harmful interference; This device may accept any interference

received, including interference that may cause undesired operation.

This device complies with the limits for a Class B digital device, pursuant to Part 15. The

Class B limits help ensure that this device provides reasonable protection against

harmful interference in residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions in this manual, may cause harmful interference to radio communications.

U519 Manual.p65

10/27/2000, 4:35 PM

40

Содержание U519















































Отзывы: