SCS Sentinel SPEETUBE+, Инструкция по установке и эксплуатации, Страница: 80 / 156

EN ::: 28
EN
dialing. You can avoid this limitation and access them anyway by
doing this:
1
Pick up the handset and press to engage the line.
2
Press and hold until «-» is displayed: your DECT phone is
temporarily in the tone dial mode.
3
Enter the number of the service that you need to access.
4
When you hang up, the phone automatically returns
to the pulse mode.
Intercom
If you connected more than one handset to a base (you can
connect up to 5 handsets to the same base), you can have a
conversation between two people using two different handsets.
1
Pick up the handset and press Left . The screen display shows
« INT x-> » ( x is your handset number).
2
Press the number of the handset that you want to contact
(from 1 to 5). The called handset starts to ring.
3
if the called party can answer your call, he/she can press
and start talking. You can see the handset number of the
called party on your screen.
4
At the end of the conversation, press .
Transferring Calls between Handsets
If you have more than one handset registered to the same base,
you can transfer an outside call between the handsets.
1
when you are connected to an external call, press Left
and the number of the handset that you want to contact
(from 1 to 5).
2
if the called party can answer your call, he/she can press
and start talking.
3
If you want to cancel the transfer before the called party
answers, press Left . The call transfer is cancelled.