Bent arm
Axis pin
Straight arm
«U» bracket
Hanging bracket
EN ::: 6
Installation (steel track)
1. Fixing the track bracket to the wall 2cm-15cm over the shaft or intermediate
bracket (depending on the actual installation space).
2. Fixing the steel track to the wall bracket with axis pin. (Fig. 6)
3. Fixing garage door opener to the track by U bracket.
It’s enough for 2 Nm fastening force.
4. Fixing the opener on ceiling by hanging bracket.
Notice: Make sure the track is horizontal and vertical to the shaft.
Make sure the connection of hanging bracket and ceiling is firm enough.
5. Fix the clutch cord.
6. Release the clutch, try to open and close the door by hand. Make sure
there is no resistance between door panel and track.
7. Connecting the opener with power and adjusting the operation.
Notice: Make sure the opener’s voltage is in accordance with the local
voltage. Connect the opener to a properly earthed power supply.
Door bracket
Wall bracket
