SL20M SL22M plissé
contr
ol unit
SL1807
Control unit
This unit is used to control the polarity inversion necessary for
the correct function of the motor, which would not be realised
when using normal switches.
Each control unit can control one blind, or can simultaneously
control a group of up to four blinds, depending on the requi-
rements of the system.
The limited dimensions of the unit allow its insertion inside the
standard electrical back box.
It comprises an electronic card equipped with a protection fuse
that can be easily replaced.
Technical features
Dimensions (mm)
40x40x20
Input
•
supply, marked as
24V dc
•
connection to the double switch or to the radio receiver,
marked by a contact graphic
•
connection from another control unit, marked as
REMOTE
;
this is used only for centralised connections to other groups
(see note below)
Output
•
connection to the blind motor or to a bus line for connection
towards other control units; marked as
MOTOR
Fuse
6,3 A
Working temperature
-20 +60°C
14
Note
The
REMOTE
terminal is available to allow the installer the opportunity to meet the client’s
requirements for a variety of group control combinations. This is achieved by connecting the
REMOTE terminal to the MOTOR output terminal of another SL1807 CONTROL UNIT. A typical
application would be where a single control is required for a number in blinds already control-
led individually by a control unit. By connecting a new control unit via the MOTOR output in
parallel with all the REMOTE terminals of the existing control units involved in the total opera-
tion, the additional control unit, once has been activated, will control all the control units simul-
taneously, whilst still allowing control of each motor separately.
Multiple control systems can be built up using this procedure.
MOTOR
REMOTE
24 Vdc
CO
M
NO
CO
M
NO
A
B
A
B
MOTOR
REMOTE
24 Vdc
COM
NO
COM
NO
A
B
A
B
Output for
blind motor
Input for additional
control unit
Input for power supply
Input for connection to switches
and/or radio receiver
SL20 22M plissé_GB 15-05-2007 9:45 Pagina 14