SCREENLINE Big Lodo Evolution, Руководство пользователя

Страница: 12 / 16

12
INFERIOR LIMIT POINTS’ CHANGING
1) Open the screen till the middle position;
2) CLEAR ALL ADJUSTMENTS
(This can only be done using a double button that
is not interlocked)
Press UP AND DOWN at hte sam time for 8”, until
the screen moves UP AND DOWN 2 times.
3) ENTER PROGRAMMING MODE
Press UP and DOWN simultaneously until the scre-
en moves UP and DOWN
Press UP and DOWN at same time for 8”,
until the screen moves UP AND DOWN 2 times.
4) ADJUSTMENT OF THE DOWN LIMIT SWITCH
Pressing DOWN, bring the screen to the down limit
point
Press UP quickly, release and press RISE again for 3”,
until the screen moves UP and DOWN.
5) STORAGE OF THE LIMIT SWITCH
Press UP AND DOWN at the same time for 3”, until the
screen moves UP AND DOWN
!
WARNING: When delivered, the motor is set on “working” mode. To change the set points it is
necessary proceed with the cancellation of the points set by the manufacturer.
IT IS ESSENTIAL NOT TO MODIFIY THE DOWN LIMIT POINT SET BY MANUFACTURER OVER ± 10 CM.
(Otherwise the warranty shall not apply)
<1 s
3 s
3 s 8 s