2
IN
AU
STRAL
IA
PR
OU
DLY BUILT
STEP 4.
FITTING DOOR TO SWING DOWN
•
The swing down door is packaged separately
•
The door bracket is pre-set at the factory at 90 degrees, as shown below
•
This will allow the fitting or removal of the door. Should the door require removal, the door
must not exceed 90 degrees
•
After the door is hung using the hook system
•
Fit the 6 side bolts with tube spacers to hold door in place
INSTRUCTIONS -
SWING DOWN FLAT PANEL LIFT
c. Utilising 4 angle brackets, and mount using threaded rod
c. Utilising 4 angle brackets, and mount using threaded rod
•
Utilising 4 angle brackets, and mount using threaded rod
4. Fitting Door to swing down
a. The swing down door is packaged separately
b. The door bracket is pre-set at the factory at 90 degrees, as shown
below
c. This will allow the fitting or removal of the door. Should the door
require removal, the door must not exceed 90 degrees
d. After the door is hung using the hook system
e. Fit the 6 side bolts with tube spacers to hold door in place
Door hook system
with bolts and
spacers shown
Swing Down
Door
4. Fitting Door to swing down
a. The swing down door is packaged separately
b. The door bracket is pre-set at the factory at 90 degrees, as shown
below
c. This will allow the fitting or removal of the door. Should the door
require removal, the door must not exceed 90 degrees
d. After the door is hung using the hook system
e. Fit the 6 side bolts with tube spacers to hold door in place
Door hook system
with bolts and
spacers shown
Swing Down
Door
4. Fitting Door to swing down
a. The swing down door is packaged separately
b. The door bracket is pre-set at the factory at 90 degrees, as shown
below
c. This will allow the fitting or removal of the door. Should the door
require removal, the door must not exceed 90 degrees
d. After the door is hung using the hook system
e. Fit the 6 side bolts with tube spacers to hold door in place
Door hook system
with bolts and
spacers shown
Swing Down
Door
Door hook system with bolts
and spacers shown
Swing Down Door
5. Limit Setting
a. Limit are accessible from slot inside swing down
b. Limit towards the front adjusts top limit / closed -
This limit should
not be adjusted as damage to the panel may occur
c. Limit towards the back adjusts the bottom limit / open
Should you have any questions regarding the installation of our products
please call our sales desk on +61 2 4869 2100 for assistance
Screen Technics Pty Ltd
Cnr Vale & Suttor Roads, Moss Vale, NSW 2577
Ph: +61 2 4869 2100
www.screentechnics.com.au
Thinking Lifters ….. Think Screen Technics
STEP 5. LIMIT SETTING
•
Limit are accessible from slot inside swing down
•
Limit towards the front adjusts top limit / closed -
This limit should not be adjusted as damage
to the panel may occur
•
Limit towards the back adjusts the bottom limit / open
ALWAYS ALLOW FOR PRODUCT REMOVAL IN ORDER TO BE SERVICED AND MAINTAINED.
Should you have any questions regarding the installation of our products please call our sales
desk on +61 2 4869 2100 for assistance
