SolidPix1™ Integrated Type I Fixed-Frame Screen Installation Manual
11
Revision A 2007.02.22
©Screen Research 2006
Frame Assembly
1. Prepare your workspace. You will need an area the
size of the finished screen plus approx 18” / 50cm on
all sides to walk around the screen. A soft surface,
such as carpet, is best if possible.
Roll out the tarp that is provided with the screen to
protect the frame and fabric from foreign matter.
2. If your frame has been delivered in multiple pieces
(generally because it is more than 126” wide),
assemble the three pieces as shown and tighten the
set screws on the back .
3. Insert the square nuts into one of the grooves in the
frame.
To know the number of square nuts you need to
insert, refer to the following table or to the optional
supports installation guides to know how many nuts
you need to put and in which frame section (top or
sides), depending on the frame section you want to
use to attach your screen.
Insert them now as there is no way to add them once
the frame is fully assembled.
70
80
90
96
100
110
120
126
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
Frame
Stiffeners
2 in the top bar and 2 in the bottom bar
4 in the top bar and 4 in the
bottom bar
TMount
Legs
2 in the left bar and 2 in the right bar
2 in the left bar, 2 in the right
bar and
2 in each stiffener
Standard
mounting
brackets
4 in the top bar and 4 in the
bottom bar
8 in the top bar and 4 in the bottom bar
SCMB
2 per bracket in the desired
frame section
2 per bracket in the desired frame section
2 per bracket in the desired
frame section
RWMB1
4 in the left bar and 4 in the
right bar
4 in the left bar, 4 in the right bar and 2 in
the top bar
4 in the left bar, 4 in the right bar
and 4 in the top bar
RWMB2
4 in the left bar and 4 in the
right bar
4 in the left bar, 4 in the right bar and 2 in
the top bar
4 in the left bar, 4 in the right bar
and 4 in the top bar