Fixed frame screen with masking installation and operation manual
ENGLISH
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: X4R3
–
Installation Manual rev1 | 23.08.2018
Page 13
04 GENERAL CHARACTERISTICS OF THE PRODUCT
The screen product is manufactured in compliance with the provisions of the following EC directives: 2014-35-CE LDV Low voltage
2014-30-EU EMC Electromagnetic compatibility
2014-53-CE Radio Equipment
2009-125-CE CONSUMPTION Ecodesign
2011-65-CE ROHS Restriction of Hazardous Substances
2012-19-CE RAEE Waste management
2001-95-CE SAFETY Safe Product
The screen described in this manual must be used exclusively as a support for video projection. Any other use not covered by this manual, it is not consented.
The screen contains one or more Fabric/sheet of projection. The Fabric of projection is a cadmium-free plastic pvc sheet or Glass wire (continuos filament) plastified PVC impregnated, any fabric can be
classified in category:
-
M1 and M2 fire classification under French standards
(LNE Laboratoire national de métrologie et d’essais –
SME Centre de recherches du Bouchet - WARRINGTONFIRE GENT Laboratoire de
métrologie et d’essais –
IFTH Laboratoire accreditè
-
B1 and B2 fire classification under German standards (LNE Laboratoire nationa
l de métrologie et d’essais –
SME Centre de recherches du Bouchet - WARRINGTONFIRE GENT Laboratoire
national de métrologie et d’essais)
-
UL94HB fire classification under USA standards (THE GOVMARK Organization, Inc.)
In the absence of a standardisation at a European level of the various national classification norms, it should be noted that the French M1 class corresponds to non flammable material and that M2 class
corresponds to flame retardant material. The screens use projection fabrics/sheets composed mainly of plasticized PVC or fibreglass. As these fabrics are sensitive to temperature and humidity, the
acceptable size tolerance is 1% in each dimension.
There is a tolerance of +/-2 mm on the aluminium profiles used.
The tollerance on the overall size are:
-
+/- 3 mm up to an overall size of 2500 mm;
-
+/- 5 mm up to an overall size of 4000 mm;
-
+/- 10 mm up to an overall size of 8000 mm;
-
+/- 20 mm up to an overall size of 16000 mm;
-
+/- 30 mm up to an overall size of 24000 mm.
05 CLEANING AND MAINTENANCE
Screens and their projection surfaces are delicate and must be cleaned with great care, according to the following instructions:
Never use solvents, chemical or abrasive products, or pointed tools to clean the surface.
Avoid contact with other materials (varnishes, inks etc) as they might be impossible to remove from the canvas.
FABRIC CLEARPIX: Use a soft, clean, dampened cloth, wiping from the center of the projection surface towards the outer edges. A vacuum-cleaner brush may be used, provided its bristles are soft and
perfectly clean.
FABRIC SOLIDPIX, MULTIPIX,:
Remove dust from the case with a soft, clean cloth and a non aggressive detergent as necessary.
Clean the projection screen with a soft, clean, damp cloth, and a neutral or alcohol-base detergent as necessary. Since rubbing the screen with a cloth during cleaning operations can cause electrostatic
charge to accumulate, we recommend the subsequent application of an antistatic liquid with a clean cloth, to avoid dust being attracted again
FABRIC SILVERPIX is Mandatory to read the instructions accompanying the fabric screen
GENERIC PROFILE: Remove dust from the case with a soft, clean cloth and a non aggressive detergent as necessary
VELVET PROFILE: Clean profile with a soft clean cloth, or a brush with soft, antistatic bristles. A vacuum-cleaner brush may be used, provided its bristles are soft and perfectly clean.
STRUCTURE and ANCHORING BRACKETS:
The state of the product and the anchoring capacity of its brackets must be checked regularly. In case of canvas deformation or rips, or loosening of structural
components such as brackets or screws, action must be taken immediately to clear the area around the screen and avoid hazard to people and things, replace the defective component and restore the
product's functionality.
06 UNPACKING AND HANDING THE SCREEN
Ensure that the screen has suffered no damage during transport. Should any fault be detected, promptly notify your dealer. Verify that all screen accessories have been included
Common
-n° 16 Plastic nut for assmbly housing
-n°1 logo Screen Research
-n° 4 Ruber gloves
-n° 1 Protective foil Nylon
-n° 1 Hex key n°3
-n° 1 Hex key n°4
-n° 1 Hex key n°2,5
-n°1 Installation manual
-n° 1 CD with manual, picture,movie
-n° 1 set MCS electric connection
-n°2 Power cord for motor power+connector
(screws and plugs for installation not included)
<=16
0”
-n°2 BRACKETS
ATTENTION do not use cutters or sharp objects to open the wrapping, always use protection gloves when unpacking, handling and installing the product.
Depending on the product’s weight (reference load:
25 Kg male
–
15 Kg female), handling and installing operations should be performed by two, three or people people at least. For heavier loads we recommend the use of specific lifting equipment.
up to inches
80”
90”
96”
100”
110”
120”
130”
140”
150”
160”
X4R3 Overall weight
104 Kg
228,8 Ibs
111 Kg
244,2 Ibs
118 Kg
259,6 Ibs
125 Kg
275 Ibs
132 Kg
290,4 Ibs
139 Kg
305,8 Ibs
154 Kg
338,8 Ibs
170 Kg
374 Ibs
177 Kg
389,4 Ibs
183 Kg
402,6 Ibs