SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART
1.9.0
12
INSTALLATION
MAC
1. Connect your DN-HC4500 to an available
USB port.
2. The Denon DN-HC4500 will be detected
automatically and will be ready to use.
WINDOWS
1. Connect your DENON DN-HC4500 to an
available USB port.
2. You will see the following prompt from
Windows: “Can Windows connect to Windows
update to search for software?”
3. Select: “No, not this time” followed by “Install
automatically”
4. Windows will then notify you that it has found
the device: “Found new Hardware DN-HC4500,
followed by USB composite device” bubbles will
appear.
5. You will be prompted to install 2 drivers. “USB
composite device” and “USB audio device”.
Follow the prompts as per the usual driver
installation method for windows.
SETUP
1. Start ScratchLIVE and switch both decks to
internal mode.
2. Turn on the Denon DN-HC4500. It will
automatically be in PC link mode.
3. You will now be able to control Scratch LIVE
with your DENON DN-HC4500.
BASIC OPERATION
To select and load tracks, use the PARAMETERS
knob to scroll through your library and crates.
By pressing the PARAMETERS knob can select
a crate, sub-crate, and load your track all without
touching your computer. The BACK button
returns you to the previous location selected.
SETTING CUE POINTS
1. Press the “MEMO” button.
2. You can then set your cue points 1-5 using the
“FUNCTION” keys along the top.
3. Once set, press the “MEMO” button again to
return to the main menu.
Your cues will now be mapped to the
“FUNCTION” keys. To delete or change your cue
points, simply repeat process 1 -3.
USING LOOPS
There are 2 loop cues you can use on the DN-
HC4500 - A1 and A2. To set the beginning (“In’)
point of the A1 loop, push the “A1” button.
To set the end (“Out”) point of the loop push the
“B” button. This button sets the end point for both
loop cues, depending on which loop is currently
playing. To clear all loop points simultaneously,
hold down the “FLIP” button for 3 seconds.
DENON DN-HC4500
