Scout PG DT, Руководство пользователя

Страница: 20 / 44

20
Lights
3.1 Selecting the desired adjustment option
1. Switch on the controller
2. Press on the ‘mode’ button (E in figure 1.2) to select the ‘adjustment options’ mode.
The controller will now be in the ‘adjustment options’ mode. It is also possible to
follow the status.
The joystick is used to select and operate the electronic adjustment options.
3. Move the joystick to the left or the right to select the desired adjustment option. The
selected adjustment option will be visible on the display screen.
4. Moving the joystick forwards and/or backwards will activate the selected electronic
adjustment option (see table 3.1). Move the joystick forwards or backwards until the
desired adjustment option has been attained.
Move joystick backwards Move joystick forwards
Tilt adjustment The entire chair will tilt
backwards The entire chair will tilt
forwards
High/low
adjustments The entire chair will be raised The entire chair will be
lowered
Backrest
adjustments The backrest will tilt
backwards The backrest will tilt
forwards
Legrest
adjustments The legrest angle will
increase, the footplate will be
raised The legrest angle will
decrease, the footplate will
be lowered
Table 3.1 Electrical adjustments
5. To return to the ‘drive’ mode: Press on the ‘mode’ button to select the ‘drive’ mode.
Note: If you move the chair while adjusting the high/low option, the speed will be
reduced.
4. Lights
Not every wheelchair has been equipped with lights. You can activate the following
functions only by using VR2 Lights and/or VR2 Seat&Lights:
 Lights (I in figure 1.2)
 Hazard Lights (J in figure 1.2)
 Direction indicators (K1 & K2 in figure 1.2)