SG560K-8M
3 Quick Introductions
3 Easy Operations
3.1 Power Supply
Use 8 or 4 AA batteries or 6v external battery for power supply.
Install the fully charged batteries into the depot according the polarities sign shown. The
following batteries with 1.5V output can be used:
1. High-density and high-performance alkaline batteries (Recommended)
2. Rechargeable alkaline batteries
3. Rechargeable NiMH batteries
When in low-battery state, camera will be automatically shut down after the indication LED
flashing for a while. Please change the batteries in time.
3.2 Insert the SD-card
The camera has no internal memory for saving images or videos. If no SD-card is inserted
or SD-card is locked, the camera will shut down automatically after a continuous indication
sound.
3.3 Power on and Entering into the ON Mode
The Camera has three basic operation modes:
1.
OFF mode
: to turn off the camera.
2.
TEST mode
: to set operational parameters, or to playback the photos or video clips via
display screen or via TV.
3.
ON mode
: to work under surveillance state.
After switching the camera to ON position, the motion indication LED (red) will blink for
about 10s. This time interval is for you to make the Camera ready for automatic surveillance
operation, e.g., to close the bottom cover and to lock it, to fix the camera on a tree and to walk
away. After entering into the ON mode, no manual controls are needed and possible. The
Camera will take pictures or videos automatically according to the previous programmed
settings, when human or animals enter into the monitoring region.
3.4 Enter into the TEST Mode
There are 3 states in TEST Mode: preview state (preview the scene in the front of the
camera), setting state (make customer settings), and playback state (view Photos or videos via
2.0” TFT display).
(Note: SG560P0 model has no preview and playback.)
3.4.1
Preview
After switching the camera to TEST Mode, it enters into the preview state.
Press
to exchange between playback mode and preview mode;
3.4.2
Customer
Settings
Press
MENU
to manually customizing the camera settings which displayed on the screen or
external TV monitor. The detailed operations will be described in “Advanced Operations”
chapter.
3.4.3
Manual
Capturing
Press
to manually capture photos or record videos. Press again
to stop the manual
Page
5
Содержание SG560K-8M
Страница 1: ...Infrared Digital Scouting Camera User s Manual Scouting Camera SG560K 8M For model SG560K 8M ...
Страница 4: ...SG560K 8M 1 Instruction Figure 1 Front view Figure 2 Operation interface Figure 3 Bottom view Page 2 ...
Страница 16: ...SG560K 8M Appendix I PIR Detection Zone normal PIR and the new patented PIR Figure 6 Page 14 ...
