Scout Guard SG560K-8M, Руководство пользователя

Страница: 11 / 18

SG560K-8M
4 Advanced Operations
the LIVE mode. Its value extends from 1 to 60 seconds with a step of one second. The default
value is 10 seconds. Press
“ ◄ ” and “ ► ” to decreases or increases the value by 1 second.
The following shows how to set video length to 15 Seconds provided that the previous
value is 1 Seconds :
a) Press MENU to display the setting menu.
b) Press “ ▲ ” or “ ▼ ” to select Video Length .
c) Press “ ► ” to increase to 15 Seconds .
d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to exit.
4.1.8
Set PIR Sensitivity
This parameter defines the sensitivity of the PIR. There are four parameters: High, Normal,
Low and PIR off. The default value is “Normal”. The higher degree indicates that the
Camera
is
more easily to be triggered by motion, taking more pictures or recording more videos. It is
recommended to use high sensitivity degree in room or environment with little interference, and
to use lower sensitivity for outdoor or environment with lots of interference like hot wind, smoke,
near window etc. Furthermore, the sensitivity of the PIR is strongly related to the temperature.
Higher temperature leads to lower sensitivity. Therefore it is suggested to set a higher sensitivity
for high temperature environment.
The following shows how to set PIR sensitivity as Low provided that the previous option is
Normal .
a) Press MENU to display the setting menu.
b) Press “ ▲ ” or “ ▼ ” to select Sensitivity .
c)
Press “ ► ” to select Low .
d)
Press OK to save the current setting and the option will be un-highlighted.
Press MENU to return to info display.
4.1.9
Set PIR Triggering Interval
This parameter means that how long the PIR (Passive Infrared motion sensor) will be
disabled after each triggering in ON mode. During this time the PIR of the device will not react to
the motion of human (or animals). The minimum interval is 0 second, it means the PIR works all
the time. The maximum interval is 1 hour, it means the PIR will be disabled for 1 hour after each
triggering. The default value is 1 minute. Press “
◄ ” and “ ► ” to decreases or increases the
value.
The following shows how to set triggering interval time to 5 Minutes provided that the
previous value is 1 Minute .
a) Press MENU to display the setting menu.
b) Press “ ▲ ” or “ ▼ ” to select PIR Interval .
c) Press “ ► ” to decrease or increase to 5 Minutes .
d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.10
Set Timer Triggering Interval
This camera has a new function, time laps function
，
which means the camera captures
Page 9