Scotty BlueBox, Руководство по эксплуатации оборудования

Страница: 12 / 36

SCOTTY BlueBox Equipment Manual
12 All rights reserved.
4.2 Cooling and Ventilation
The SCOTTY BlueBox requires cooling. Although it will protect itself against
overheating, the self-heating power must be dissipated through the mounting
structure and/or through air circulation.
On default, the SCOTTY BlueBox comes with two 80mm temperature
controlled fans mounted on top of the unit.
Alternatively, the installation of the SCOTTY BlueBox in an environment with
sufficient forced air cooling is feasible.
4.3 Electrical Installation
The SCOTTY BlueBox gets connected with several interface connectors at the
rear side of the unit. Power supply, monitor, keyboard, mouse, headset,
Ethernet and more are available on these connectors. In addition an USB 3.0
port is available on the front of the unit, e.g. for data import or data export.
For details, see chapter Connectors and Pin-Outs.
The use of shielded cables is highly recommended. Use shielded twisted-pair
wiring for all balanced connections, and coax cables with the appropriate
impedance.
Before connecting the unit, make sure the power supply matches power
requirements (see chapter Power Requirements) and is properly fused.
4.4 Software Configuration
To allow optimal operation, the software settings of the SCOTTY BlueBox need
to match the electrical installation and the external equipment.
Therefore, especially the codec audio and video settings in the
Config Utility
and in the
Teleport
application should be configured as required.
Please refer to the chapter Connectors and Pin-Outs for the signal labels
cross-referenced by software and hardware.
For configuration details, please refer to the Software Manual.