Scotty AirFlo Duo, Руководство пользователя

Страница: 21 / 29

What I find works best is if you find a short 10 second circuit where you can vary
your intensity from soft motion all the way to hard motion (or as hard as you can
physically go).
1. Start with both Payload Spring Adjusters set to the ideal level that you
already worked out before.
2. Set the fluid damping adjustment to 0%.
3. Do the ‘Bounce Test’ to make sure the the damping is even and adjust if
necessary.
4. Do your ‘soft’ motion shot and examine footage.
5. Next turn both Fluid Damping Knobs half a full rotation to 10% Damping
and do the ‘bounce test’ again (adjust if necessary).
6. Do your ‘soft’ motion shot again and examine the footage and compare it
to the first footage.
a. If the first shot was best then keep a note of the first setting.
b. If the new shot was better then increase the damping again and keep
testing until you find the footage smoothing declines.
7. Once you have your ‘soft motion’ settings nailed down then keep the
damping at the last ‘ideal’ setting and start the process again but this time
up the intensity to the next movement with gentle walking.
8. Next try normal walking
9. Then brisk walking
10.Then jogging
11.Then running
12.Finally hard motion such as on uneven ground or jumping about. Don’t be
too hard on yourself if this last one doesn’t work out at first!
Once you apply these new 4th axis stabilizer techniques to your shoots you’ll find
you can get even better traditional gimbal moves such as push in, pull out, follow,
lead, orbits etc.
20
User Guide - AirFlo Duo - 4th Axis Stabilizer - 20181209 ScottyMakesStuff.com