Scotts Evolution Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 14

Scotts Evolution Скачать руководство пользователя страница 6

General machine Safety and accident prevention

All aspects of safety advice, whether through this manual or by national accident
prevention regulations must be observed:

1. Warning signs and other notices on the machine are there to provide you with

visible important information for safe operation of the machine and to reduce the
risk of personal injury.

2. Before attempting to start work, please familiarise yourself with all equipment and

controls and the functions they perform.

3. Please ensure any users wear close-fitting clothing. Avoid using loose fitting

clothing.

4. Keep the machine clean at all times to see visible signs of wear.
5. Check around the machine before starting it up, to ensure there are no obstacles

in the way (including people)

6. Only start the machine up if all protective guards are fitted correctly and in their

protective positions.

7. Dangerous parts are located behind the protective covers. These do not

necessarily come to a standstill when the drive is switched OFF. Therefore, keep
well clear until such parts have come to a complete standstill.

8. Only carry out maintenance, repair and cleaning work on the machine when the

machine is electrically isolated.

9. NEVER allow persons to stand on the machine whilst working!
10. The designs and functions of intake and discharge mechanisms i.e. rotating

shafts, conveyors etc. means they cannot be fully protected. Therefore always
keep a safe distance from such moving parts when the machine is in operation.
This advice also applies to any ancillary equipment.

Only carry out work on the unit when the isolator is switched OFF

Warning Symbols and Advice

The  warning  symbols  are  to  indicate  dangerous  areas  of  the  machine  and  specific
operations for safety and trouble-free operation.
Please follow all warning symbols and information stickers at all times!
Always  ensure  warning  symbols  and  information  stickers  are  kept  clean  and  in  legible
condition.  Any stickers that are not legible

must

be replaced immediately and attached

in their designated positions on the machine!

All guards must be securely closed when machine is
running

Do not remove or render illegible any warning stickers.
Replace any immediately if this happens!

Page 3

«
...
4
5
6
7
8
...
»

Содержание Evolution















Отзывы:

Нет отзывов