ENGLISH
ENGLISH
•
ADJUSTMENT
We recommend all adjustments are carried out by your local authorized SCOTT dealer but
basic maintenance and checks should be done regularly before each ride as described in the
general manual that was supplied with your bike.
Please pay attention to all instructions and torque settings, if you have any doubts please
contact your dealer,
*in addition to the torque settings please note all bikes with a dropper type seatpost have a
seatpost clamp maximum torque of 5 N/M.
•
BB STANDARDS/FD MOUNTING DETAILS
The SCOTT Scale has a Press fit PF92 bottom bracket with an inner diameter of 41mm, this
is a press fit system and special tools are required for removal and refitting, please contact
your SCOTT dealer for assistance.
The SCOTT Scale (non RC models) uses
a high direct mount side swing front
derailleur only, this must be used with the
use of an FD adaptor plate.
It is not possible to mount a front
derailleur to RC frames/bikes.
These cable guides are fitted with a single bolt, the fixing torque of this must not exceed
0.75-1 N/M.
With the many different cabling options it is possible to customise the cable routing slightly
depending what components you wish to run, it is recommended that handlebar cables
that come from the right hand side enter the frame on the left, and handlebar cables that
come from the left hand side enter the frame on the right, while this is not crucial to the
performance of the bike it may help to prevent any cable rub.
Below is an example of a bike set up “European style” with a 1X set up and a dropper seatpost.
Please note that below is an example and that your bikes brakes need to be set up as per
the law in your country, please check with your local SCOTT dealer for this information.
15 |
BIKE USER MANUAL |
SCALE
SCALE
| BIKE USER MANUAL
| 14
