ENGLISH
ENGLISH
If your dropout needs to be replaced, we recommend this work should be carried out by
your local SCOTT dealer as the rear derailleur may need adjustment, failure to adjust this
correctly may result in accident or damage to your bike.
•
IMPORTANT!
We recommend all work should be carried out by your authorised SCOTT dealer!
If you wish to change this item yourself, please ensure the bike is supported correctly to
prevent damage. Please refer to the general manual supplied with your bike for instructions.
Before installing the new hanger first
make sure the area is clean; insert
the hanger.
Insert the end cap through the frame and
into the hanger.
Make sure the location arrow is pointing
to the lower bolt hole; insert the bolt (Max
torque 1.5 N/M)
Insert the second bolt in the rear of the
dropout (Max torque 1.5 N/M)
Once the bike is reassembled please insure the wheels are refitted correctly and the gears
are set correctly including the over shift stops, please consult your authorized SCOTT dealer
for assistance.
•
BRAKE MOUNT
•
IMPORTANT!
We recommend all work should be carried out by your authorised SCOTT dealer!
There is an option to use either a 160 or
180mm brake rotor on the rear of for SCOTT
Scale carbon with the use of the correct
adaptor (note this does not apply bikes with
boost Q/R).
New mounts are available from your authorized
SCOTT dealer and the size is marked on the
underside of the mount.
Part number: 254096 /160 mm brake mount.
Part number; 254095 /180 mm Brake mount.
If you wish to change this item yourself, please ensure the bike is supported correctly to
prevent damage. Please refer to the general manual supplied with your bike for instructions.
For this adaptor to be fitted you must remove the rear wheel and rear brake calliper.
Once all the correct items are removed the new mount will fit by swinging into place.
11 |
BIKE USER MANUAL |
SCALE
SCALE
| BIKE USER MANUAL
| 10
