ENGLISH
ENGLISH
BB STANDARD AND FD MOUNT STANDARD
The BB standard on Plasma 4 is PF86.
FD Mount Standard:
Brazed on standard same as other SCOTT road frames: Solace,
Addict or Foil.
HEADSET OPTIONS
Plasma 4 headset Syncros Drop-In 1 1/8” black part number: 238600
Bearings standard: IS41/28.6 | IS41/30
BB CABLE GUIDE AND CABLE ROUTING
BB cable guide set Plasma 4 Di2 + mechanical part number: 239179
SEATPOST AND SEATUBE CLAMP
SADDLE ASSEMBLY:
•
IMPORTANT
Before assembling the saddle, make sure the seatpost saddle rail clamps (524/525)
are compatible with your saddle rails!
1. measure your saddle rails height and width (HxW)
2. Ritchey WCS Carbon One-Bolt Saddle Rail Clamp outer-pieces specifications
should be compatible with your saddle rails
3. if the saddle rails dimensions you measured are different from the saddle clamps
specifications, purchase the required saddle rail clamps parts at your retailer’s
4. following dimensions are available: 7x7mm, 8x8.5mm or 7x9.6mm
5. set the right saddle tilt and position the saddle rails so that the saddle rail clamps
are in the middle of the usable rail clamping area
6. tighten the M6 screw (527) to the specified torque (T13) to assemble the saddle
7. use the seatpost adjustment barrel to adjust your BB-Saddle horizontal offset
8. once the right offset is set, tighten the two M5 barrel screws (521) to the specified
torque (T12)
9. in some cases, you will need to remove the saddle to access the two M5
barrel screws.
09 |
BIKE USER MANUAL |
PLASMA 4
PLASMA 4
| BIKE USER MANUAL
| 08
