Scott MDX i65, Руководство пользователя, Страница: 25 / 34

GB–24
CLOCK / TIMER
Sleep Timer Setting
If the sleep timer is activated, the system will switch to standby mode after the selected time has
expired.
1.
Press and hold down SLEEP key for more than 2 seconds to start sleep timer setting. “ SLEEP
OFF ” will be displayed.
2. Press PRESET / or PRESET / to set the sleep timer as follows:
SLEEP OFF 120 MIN 110 MIN 100 MIN 90 MIN 80 MIN
60 MIN 50 MIN 40 MIN 30 MIN 20 MIN
70 MIN
10 MIN
3. When you reach the desired time, stop pressing PRESET / or PRESET / key, and
press / ENTER key to confirm your selection. “ SLEEP ” icon will appear on the display,
except for “ SLEEP OFF ” mode.
While SLEEP mode is activated, you can check the remaining time
Press SLEEP key on the remote control to view the remain time.
Press and hold down SLEEP key for more than 2 seconds.
– “ XXXMIN ” will be displayed. “ XXX ” is the remaining time in minute.
To change the preset sleep timer
– Press and hold down again during sleep time checking.
To deactivate the Sleep Timer
– Press PRESET / or PRESET / repeatedly during sleep time checking until “ SLEEP
OFF ” is displayed, or press STANDBY/ON.
TUNER
Tuning to radio stations
1. Press FM / AM on main unit or TUNER on remote control to select Tuner FM or AM band.
2. Press and hold TUN / or TUN / key to search stations automatically, once a
station is found, the search will automatically stop.
3. Keep pressing the TUN / or TUN / key on remote control, the tuning will stop
whenever you release the button.
– To tune to a weak station, briefly press TUN / or TUN / key repeatedly until the
display shows the desired frequency or when the best reception has been obtained.
Storing preset stations
You can store up to 20 stations for FM and 20 for AM in the memory. When a preset radio station
is selected, the preset number appears on the display.
Manual programming
1. Press FM / AM on main unit or TUNER on remote control to select the desired waveband: AM
or FM.
2. Press TUN / or TUN / key to the desired frequency.
3. Press PROG key on remote control to active the preset number for storing.
4.
If you wish to store the radio station to another preset number, press PRESET / or
PRESET / to select the desired preset number.