Scott MDX i65, Руководство пользователя, Страница: 24 / 34

GB–23
CLOCK / TIMER
3. Press / ENTER key on the remote control to confirm the selection, then CLK 24 or CLK 12
will show on the display.
4. Press PRESET / or PRESET / to select the hour format, the “ 24 ” or “ 12 ” is
flashing.
5. Press / ENTER key on the remote control to confirm the selection, the hour indication will
start flashing.
6. Press PRESET / or PRESET / key to set the hour.
7. Press / ENTER key on the remote control to confirm the setting.
8. Repeat step 6 and step 7 for minute setting. The clock will begin working after setting
above.
Notes:
The clock will be erased when the power cord is disconnected or if a power failure occurs.
During clock setting if no button is pressed within 5 seconds, the system will exit clock
setting mode automatically.
If the RDS time synchronization is activated on the system , the SYNC ON will be set. The system
time is automatically updated by this RDS function.
Timer Setting
The system can switch on to DISC, USB or CARD mode automatically at a preset time, serving as
an alarm to wake you up.
IMPORTANT!
Before setting the timer, ensure that the clock is set correctly. The timer can only be
activated from standby mode.
1.
Press and hold TIMER key on the remote control for more than 2 seconds to start timer
setting mode.
The wake up source will appear on the display (for example: DISC or USB).
2. Press PRESET / or PRESET / on the remote control to select the source for timer.
3. Press / ENTER on the remote control to confirm the setting.
4. Repeat step 2 and step 3 to set volume, the timer shut on or off.
Activating the Timer
Press TIMER key on remote control to turn the timer on or off. The TIMER icon will appear on the
display if the timer is ready.
Notes:
– The function of timer-off will not be activated if the starting and stopping time are the same.
– If the selected source DISC is not available when preset timer is reached, TUNER will be
selected automatically.
– During timer setting, if no button is pressed within 10 seconds, the system will exit timer setting
mode automatically.