Masterdock Docking Station
Instruction Manual
9 of 20
P/N 087-0045 Rev. E 01/10
3.
Setup and Mounting
3.1.
Mounting the Masterdock
The Masterdock does not need to be mounted on a wall to operate. It may be placed on any desk
top, table top, or other horizontal surface and will operate. However, users may choose a more
permanent location, such as mounted on a wall.
To mount the Masterdock on the wall, drill four holes per the dimensions shown in Figure 3-1.
Mounting hardware must not exceed 14.5 mm in diameter and be capable of supporting the weight
of the Masterdock.
NOTE
T
HE
M
ASTERDOCK WEIGHS APPROXIMATELY
8.5
LBS WITHOUT A CYLINDER OR
P
ROTÉGÉ DOCKED
.
Allow for sufficient spacing around the Masterdock to utilize all the features such as installing
calibration cylinders and accessing the battery compartment.
Figure 3-1. Masterdock Wall Mounting Dimensions
