Page 5 of 12
P/N 595284-01 Rev A 9/13
DESCRIPTION OF THE CONTROLS
•
The PWR or Power Button activates the unit for use. The unit must be
on to SWIPE IN or OUT and to communicate with the IMPERIUM Ac-
countability System Base Station.
•
The RANGE Light glows GREEN to indicate when the QUEUE Interface is
communicating with the Accountability System Base Station. The RANGE
Light will show YELLOW if the Unit is out of range and not connected
to an active Base Station. After two (2) minutes, the light will go out.
•
The opening DISPLAY shows the current time and the Total Number of
individuals who have logged into the QUEUE Interface.
•
The DOWN ARROW scrolls the Display through the list of logged-in indi-
viduals. When it reaches the end of the list, the scroll will begin again at
the top of the list. If no action is taken after five (5) seconds, the Display
returns to the opening screen.
•
The DEL or Delete Button is used to remove an individual from the list
(Manually Log Out).
•
The DROP Button is used to remove the entire QUEUE Interface group
from the Base Station (as if the vehicle was leaving the scene). Press
and hold the DROP button (2 to 3 seconds).
•
The S/O or Swipe Out Button. See below.
• The ACK or Acknowledge Button is used to respond to an EVAC message
sent to the QUEUE Interface. The display will show EVAC and produce
a loud Warning Sound. The individual designated to monitor the loca-
tion of resources logged into that QUEUE Interface must verify that all
resources have received the message to EVACUATE before pressing
the ACK button to send an Acknowledge message to the Accountability
System Base Station and silence the Warning Sound.
•
The SWIPE AREA is used to either log in or log out to the QUEUE
Interface.
•
If the QUEUE Interface is removed on the current Accountability System
Base Station, the RANGE light will show YELLOW as the QUEUE Inter-
face searches for another Base Station to communicate with. If no other
Base Station if found and the QUEUE Interface will reconnect with the
current Base Station and reappear as an available resource.
RANGE
LIGHT
DISPLAY
POWER
BUTTON
SWIPE
AREA
WARNING
TRAINING IS REQUIRED BEFORE USE OF THIS
EQUIPMENT IN A HAZARDOUS SITUATION. THE
TRAINING MUST INCLUDE AN UNDERSTANDING
OF THE LIMITATIONS OF THE EQUIPMENT
ALONG WITH EXTENSIVE PRACTICE WITH THE
SYSTEM IN A VARIETY OF ENVIRONMENTS.
USE OF THIS EQUIPMENT MUST BE A PART OF
A COMPLETE PERSONNEL ACCOUNTABILITY
SYSTEM. ALWAYS UPDATE TRAINING WITH
EACH NEW PIECE OF EQUIPMENT. USE OF
THIS EQUIPMENT WITHOUT PROPER TRAINING
MAY PLACE THE USERS AT HIGHER RISK IN
DANGEROUS SITUATIONS WHICH COULD
RESULT IN SERIOUS INJURY OR DEATH.
USE OF THE ACCOUNTABILITY SYSTEM QUEUE INTERFACE
CONTINUED ON NEXT PAGE...
WARNING
THE BASE STATION CANNOT COMMUNICATE
BACK TO THE QUEUE INTERFACE EXCEPT
TO SEND AN EVAC NOTICE. THE LIST OF
PERSONNEL LOGGED INTO THE QUEUE
INTERFACE CANNOT BE ALTERED FROM THE
BASE STATION WITHOUT THE USE OF A USB
CABLE MAKING A DIRECT CONNECTION TO
THE QUEUE INTERFACE. FAILURE TO ACCOUNT
FOR THIS WHEN ASSIGNING AND ACCOUNTING
FOR PERSONNEL MAY RESULT IN SERIOUS
INJURY OR DEATH.
