Removing and Installing Grille
WARNING
Disconnect electric power to the unit before
removing the grille.
WARNING
DO NOT touch the condenser fins. The condenser
fins are SHARP and can be easily damaged.
Removing the grille.
1. Disconnect power to the unit.
2. Remove control knob (2).
3. Loosen the two screws (1).
4. Remove grille (3) from unit.
5. Reconnect power to the unit.
Installing grille:
1. Place the hook-hinge located on the rear bottom
side of the grille (3) onto the front lip of the unit
base. Swing the grille up into position.
2. Align cabinet and grill holes and secure, but do
not overtighten grille screws (1).
3. Install control knob (2).
4. Reconnect power to the unit.
May 2011
Page 12
SCR33
User's Manual
1
2
3
