Option: Adjustable ice level control, kit # KVS
When this option is present there is an adjustment
post and an additional indicator light to the right of
the four indicator lights mentioned above. The
ultrasonic ice level control allows the user to control
the point that the ice machine will stop making ice
before the bin or dispenser is full. Reasons for this
include:
•
Seasonal changes in ice used
•
Planning to sanitize the bin
•
Faster turnover for fresher ice
•
Certain dispenser applications where
maximum ice level is not desired
Use of control
There are several positions the ice level can be set
to, including Off (knob and label indicators lined
up), where it fills the bin until the standard bin
control shuts the machine off. See the kit’s
instructions for complete details.
Rotate the adjustment post to the desired ice level.
The machine will fill up to that level and when it
shuts off the indicator light next to the adjustment
post will be On.
Note: Ice will build up in the bin or dispenser at an
angle, the distance set will be from the sensor to
the top of the ice.
The actual distance between the highest point of
the ice may be closer or further away than the
distance set, depending upon the angle of the ice.
Option: Advanced Feature Board, kit #KSB
When this option is present there is an additional
display panel in the area below the main control
board. It is not visible when the front panel is on.
The Smart-Board’s features include:
•
Seven day programmable ice level setting
when used with the optional Ultrasonic ice
level control
•
Recording of machine operation, including
cycle time.
•
Calculation of average cycle time
•
Recall of malfunctions with the time they
occurred.
October 2014
Page 4
C0322 through C1030 D Series
Air and Water Cooled User Manual
02-4294-01 Rev. A.
Adjust Ice Level
Lo
wer
Bin
Full
VariSmart Control Area
SmartBoard
Advanced Feature Control
™
See Instructions for Available Features
34
SEL
02-4293-01
Rev A.
ENTER
ESC
