FOR THE INSTALLER: Specifications
The NM1850RH is designed to fit the
Scotsman storage bin B590 and the BX560
extension. Leg kit KLP4 is recommended
when using both the bin and the extension.
Installation Limitations: The NM1850RH is
designed for indoor installations only. The
machine must also be in a controlled
environment where the air temperature does
not fall below 50
0
F., or go above 100
0
F.
The water temperature must be between
40
0
F. and 100
0
F.
The electrical power supply must not drop
below -5% of the lowest nameplate voltage or
go above 10% of the highest nameplate
voltage.
SPECIFICATIONS:
Scotsman Ice Systems are designed and
manufactured with the highest regard for
safety and performance. They meet or
exceed the standards of U.L., N.S.F., and
C.S.A.
Scotsman assumes no liability or responsibility
of any kind for products manufactured by
Scotsman that have been altered in any way,
including the use of any parts and/or other
components not specifically approved by
Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to
change without notice.
NM1850RH-32A
27" X 42" X 24"
NUGGET
208-230/60/1
2.7
15
16,000
Model Number
Dimensions (w/o Bin)
H" x W" D"
Ice
Type
Basic
Electrical
Minimum
Circuit
Ampacity
Maximum
Fuse
Size
BTU’s
Required
15.53"
3.1"
SUCTION LINE CONNECTION
7
⁄
8
"
LIQUID LINE CONNECTI0N
1
⁄
2
"
20.84"
9.43"
5.25"
3"
17.8"
18.8"
21.66"
ELECTRICAL INLET
POTABLE WATER INLET 3/8" FLARE
DRAIN 3/4" FPT
BACK VIEW
NM1850RH
May, 1989
Page 2
