FOR THE INSTALLER: Location & Assembly
Stacking Instructions
A stacking kit, KSMCM48, is required to
interconnect the ice level controls, seal the
freezing compartments, support the bin with heavy
duty legs, and retain the front panels.
Follow the installation instructions of the stacking
kit, but in general:
The first thing to do when adding a unit is to
replace the bin casters (if the unit has been
installed with casters) wtih heavy duty legs.
Casters must not be used with two ice
machines on one bin.
When stacking two units, remove the top panel
and the evaporator cover from the lower icemaker.
(The top removed from the lower icemaker will no
longer have any function.)
Add a strip of gasket (from the stacking kit) to the
top edge of the bottom ice machines evaporator
compartment.
Install the panel retaining bracket onto the bottom
ice machine before placing the upper unit on it.
Place additional gasket onto the top edges of the
bottom ice machine.
Carefully lift the uncrated top unit onto the bottom
one and align the two cabinets. Use of a
mechanical lift is recommended for this step.
At the back of the two icemakers, bolt the upper
icemaker cabinet to the lower icemaker cabinet
using the mounting straps and bolts from the
hardware package.
Add the relay kit to interconnect the two ice
machine’s bin control circuits.
EVAPORATOR COVER
STACKING
PANEL RETAINING
BRACKET
MCM1462R
April, 1993
Page 4
