FOR THE INSTALLER
These machines fit the following Scotsman
products, check sales literature for other possible
combinations:
B90 and extensions (with bin top KBT18)
HTB555 or BH550 using bin top KBT14 or KBT20
BH800 using bin top KBT15 (one unit).
BH800 (two units, no bin top required).
BH900 using bin top KBT24.
When installing a new system, check to be sure
that you have everything you need before
beginning:
Correct Bin
Correct Ice Machine
Correct Bin Top (if required)
All kits, legs, and information required for
the specific job.
Installation Limitations:
This ice system is designed to be installed indoors,
in a controlled environment:
Min. Max.
Air Temperature
50
0
F
100
0
F
Water Temperature
40
0
F
100
0
F
Water Pressure
20 PSI 80 PSI
Voltage (for 115v model)
104
126
(Compared to the nameplate)
Operating the machine outside of the limitations is
misuse and can void the warranty.
The normal finish for the ice machine is enamel.
A stainless steel panel kit, SPKFM21 may be field
installed to convert the unit to a stainless steel
finish.
Note: Minimum Circuit Ampacity is used to determine wire size and type per national electric code.
SPECIFICATIONS: ICE MAKER
Model Number Dimensions
Basic
Electrical
Ice Type Condenser
Type
Minimum
Circuit Ampacity
Max.
Fuse Size
Refrigerant
Charge:
FME800AE-1A
27" x 21" x 24" 115/60/1
Flake
Air
19.5
30
24 ounces
FME800WE-1A same
same
same
Water
18.3
30
20 ounces
FME800AE-6B
same
230/50/1
same
Air
24 ounces
FME800WE-6B same
same
same
Water
20 ounces
NME650AE-1A
same
115/60/1
Nugget
Air
19.5
30
24 ounces
NME650WE-1A same
same
same
Water
18.3
30
20 ounces
NME650AE-6B
same
230/50/1
same
Air
24 ounces
NME650WE-6B same
same
same
Water
20 ounces
NME650 & FME800
February 1997
Page 2