FOR THE INSTALLER: Specifications
The FM2400RH is designed to fit the Scotsman
storage bins BH800 or B90. Leg kit KLP4 is
recommended when using both the B90 bin and
an extension.
Installation Limitations: The FM2400RH is
designed for indoor installations only. The machine
must also be in a controlled environment where
the air temperature does not fall below 50
0
F., or
go above 100
0
F.
The water temperature must be between 40
0
F.
and 100
0
F.
The electrical power supply must not drop below
-5% of the lowest nameplate voltage or go above
10% of the highest nameplate voltage.
SPECIFICATIONS:
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of U.L., N.S.F., and C.S.A.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any parts and/or other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.
FM2400RH-32B
27" X 42" X 24"
Flake
208-230/60/1
2.7
15
16,000
Model Number
Dimensions (w/o Bin)
H" x W" D"
Ice
Type
Basic
Electrical
Minimum
Circuit
Ampacity
Maximum
Fuse
Size
BTU’s
Required
15.53"
3.1"
SUCTION LINE CONNECTION
7
⁄
8
"
LIQUID LINE CONNECTI0N
1
⁄
2
"
20.84"
9.43"
5.25"
3"
17.8"
18.8"
21.66"
ELECTRICAL INLET
POTABLE WATER INLET 3/8" FLARE
DRAIN 3/4" FPT
BACK VIEW
FM2400RH
August 1994
Page 2
