Specifications
This ice machine is designed to be installed
indoors, in a controlled environment. While it can
operate satisfactorily under a wide variety of
conditions, do NOT operate the machine in
temperatures it has not been designed for. Do
NOT operate the machine above or below the
voltage limits for the particular model. Do NOT
operate the machine with too little or too much
water pressure.
Operational Limits
Minimum
Maximum
Air Temperature
50oF.
100oF.
Potable Water Supply
Temperature
40oF.
100oF.
Condenser Water
Inlet Temperature
40
o
F.
1
0
0
o
F.
Water Pressure
20 psi
80 psi
Voltage (60 Hz)
197
253
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any parts and/or other components not
specifically approved by Scotsman.
Bins:
All models will fit a standard, 48" wide or wider
open top Scotsman Ice Storage Bin. Some
examples are:
•
BH900
•
BH1370
•
BH1356
•
BH1650
•
BH1000 (requires kit KBT21)
In addition, there may be other bins that can be
used, check Scotsman’s sales literature for
application information.
Note: Slope-front bins must have an internal baffle.
Scotsman BH900 and BH1000 have the required
baffle. Baffle must be approximately in the position
shown in the diagram below.
CME1856W
November 2001
Page 2
Model Number
Dimensions
W x D x H
(w/o bin)
Basic Electrical
(volts/Hz/phase)
Condenser
Water
Supply
Refrigerant
Charge
R-404A
Minimum
Circuit
Ampacity
Maximum
Fuse Size
CME1856WS-32
48 ½ “ x 24" x 28”
208-230/60/1
GPH 107*
60
30
40
CME1856WS-3
same
208-230/60/3
GPH 107*
60
20
30
*Condenser only @90/70
If the numbers on the nameplate are different than the above, use the nameplate’s information.
The stacking kit required to place two like model cubers together is:
KSCME6-LG-B.
BASIC INFORMATION
12.0"
4.0"
Side View
Baffle
