April, 2016
Page 16
C0530E through C1030E
Remote Condenser Models - User Manual
Use and Operation
Once started, the ice machine will automatically make
ice until the bin or dispenser is full of ice.
When ice level drops, the ice machine will resume
making ice.
Caution: Do not place anything on top of the ice
machine, including the ice scoop. Debris and moisture
from objects on top of the machine can work their way
into the cabinet and cause serious damage. Damage
caused by foreign material is not covered by warranty.
There are four indicator lights at the front of the
machine that provide information on the condition of
the machine.
Indicator Lights:
• Power
• Status
• Water
• De-Scale & Sanitize
Indicator Lights & Their Meanings
Power
Status
Water
De-Scale & Sanitize
Steady Green
Normal
Normal – bin full or
making ice
-
-
Blinking Green
Self Test Failure
Switching on or off
-
-
Blinking Red
-
Diagnostic shutdown
or, if making ice,
temperature sensor
failure
Lack of water
-
Yellow
-
-
-
Time to de-scale and
sanitize
Blinking Yellow
-
-
-
In Cleaning mode
Light off
No power
Switched off
Normal
Normal
All Blinking
Unit remotely locked out – check with leasing company
If the Water light is on, the machine has sensed a
lack of water. Check the water supply to the machine.
The water may have been shut off or the water filter
cartridges need to be changed.
If the De-Scale light is on, the machine has
determined that it may need to be cleaned. Contact
an authorized Scotsman service agent and have the
machine cleaned, de-scaled and sanitized.
Note: A Component Indicator Light switches ON to
indicate that the component is operating.
Note: There are two Curtain Switch lights, SW1 and
SW2. These single plate models have
one curtain
switch light on all the time
(either one), as a curtain
switch light is ON when a curtain is either open or not
present.
