Scotchman SHEARMASTER 610, Руководство пользователя

Страница: 15 / 55

Page 14
The Scotchman Shear is an exceptionally rugged machine designed for long life with a minimum
amount of maintenance. A regular program of servicing will extend the life of the machine and prevent
costly down time.
5.0 MAINTENANCE
Re-oil the blades every 10 to 15 cuts.
The oil will allow the machine to shear easier and increase tool life considerably.
We recommend cutting oil or motor oil swabbed on with a brush or applied with a squirt can or a spray
applicator.
Grease the main pins daily.
(SEE FIGURE 6 ON THE FOLLOWING PAGE.)
Grease all other fittings twice per week.
Mobil Grease XHP 222 Special is recommended.
Once a month, check the oil level in the reservoir. It should be approximately 2 inches (50mm) below
the top of the reservoir.
The recommended hydraulic oil is a lightweight, non-foaming, hydraulic oil such as Mobil DTE 25 or
equivalent. The reservoir capacity is 24 U.S. gallons (91 liters).
5.1 LUBRICATION
IMPORTANT: Before operating the SHEARMASTER 610, apply oil to the bar shear blades.