Scotchman SHEARMASTER 610, Руководство пользователя

Страница: 11 / 55

4.4 ELECTRICAL REQUIREMENTS
Ö
CAUTION: TO PREVENT DAMAGE TO THE MOTOR AND DANGER TO THE OPERATOR,
ALL ELECTRICAL CONNECTIONS SHOULD BE MADE BY A LICENSED ELECTRICIAN.
All machines are wired for three phase electrical power unless otherwise specified by customer. The sup-
ply voltage should be (+ or -) 10% of the motor voltage rating, to insure satisfactory machine perfor-
mance. Check the motor data tag for full load current requirements.
The electrical diagram for the machine is inside the cover of the control box. THE DIAGRAM IS ALSO
IN FIGURE 4. For electrical supply lines ten feet (3 m) or shorter, we recommend at least 12 and prefer-
ably 10, gauge wire. For longer supply lines, use at least 10 gauge and preferably, 8 gauge.
We do not recommend supply lines longer than twenty five feet (7.5 m).
POWER REQUIREMENTS:
Motor frame 3PH=182T 1PH=184T
MOTOR VOLTAGE FULL LOAD CURRENT
(VAC) (AMPS)
208 31
230 29.6
460 14.8
575 12
230 (single phase) 40
Motor power rating: 10hp Speed 1,725 RPM
KVA power rating: 7.9 KVA Frequency 60 HZ
Starting Current: 210% Full Load
PAGE 10