1995-00 Oldsmobile Aurora
RADIO REMOVAL:
1. Carefully unsnap dash bezel and remove.
2. Extract (3) 7MM screws securing radio, unplug connectors, antenna lead and remove
radio.
1995-00 Oldsmobile Alero
RADIO REMOVAL:
1. Unsnap shifter panel and leave it loose.
2. Using a panel removal tool remove radio trim bezel (there are a total of six snaps)
unplug and remove.
3. Extract (3) 9/32" screws holding radio, unplug and remove.
2002-UP GMC Envoy
2004-UP Buick Rainier
2003-UP Isuzu Ascender
RADIO REMOVAL:
1. Open center console lid and extract (2) Phillips screws from front of console, lift out
rubber pads and extract (4) more Phillips screws from under. Remove console insert.
2. Extract (2) 9/32" screws from console cavity.
3. Remove rubber pad from front cup holder and extract (1) 9/32" screw from under.
4. Extract (4) Phillips screws from sides of carpeted panel directly under radio and climate controls, pull it down and
out of the way.
5. Pull center console back and down to get to (2) Phillips screws on bottom of radio bezel. Pry bezel out from top to
bottom, disconnect and remove.
6. Extract (3) 9/32" screws securing radio.
2003-UP Hummer H1
RADIO REMOVAL:
1. Remove (4) Screws securing radio/dash bezel & remove.
2. Remove (3) 7MM hex screws holding radio, unplug and remove.
2003-UP Hummer H2
RADIO REMOVAL:
1. Open center console storage and extract 4 screws securing hinged lid.
2. Remove Torx lock nut holding Shift lever (Nut is facing forward) and Slide shift lever off.
3. Use a panel removal tool to carefully pop up cup holder/gear indicator plate.
4. Extract (2) 7mm hex screws at bottom of center dash bezel (revealed in previous step #3).
5. Extract (2) 7mm hex screws from center dash bezel (near each vent).
6. Carefully pry out on center dash bezel to unsnap, unplug and remove.
7. Extract (3) 7mm hex screws holding radio, unplug and remove.
6
2000-UP Chevrolet Venture
2000-04 Oldsmobile Silhouette
2000-UP Pontiac Montana
RADIO REMOVAL:
1. Remove ashtray and extract (2) Phillips head screws from behind.
2. Unsnap perimeter of radio trim bezel, lift away and remove. Extract (3) Phillips head
screws
securing radio, lift away, disconnect and remove.
Содержание GM1583
Страница 8: ...8...
