
24
Teaching New Touch Keys to the Security System
IMPORTANT NOTICE:
When teaching one or more Touch Keys into the security system all previous Touch
Keys will be erased from the system. You must always teach ALL the Touch Keys
required to operate the security system at the same time.
NOTE:
When using the Keypad, each time a button is pressed the LED on the Keypad
will flash once as confirmation. The next button should not be pressed before
this confirmation. However, you only have 2 seconds to enter the next character.
If you do not press the next character within this time period, the LED on the
Keypad will flash repeatedly, after which you must start the sequence again from
the beginning.
With the ignition switched off and the security system disarmed, type into the
Keypad the following:
Where
AAAA
represents the 4-digit PIN code and n represents the
total
number of
Touch Keys to be recognised by the security system (maximum 4). To confirm correct
input of your PIN code the siren will bleep after entering the last digit. The number
990
is the access code/command, which notifies the security system to accept the
new Touch Keys.
Then immediately press the first Touch Key briefly onto the receptacle and remove it,
the dashboard LED will illuminate
red
for
1 second
and the siren will
bleep
as
confirmation that the touch key has been learnt, now press the second Touch Key
briefly onto the receptacle and remove it, the dashboard LED will illuminate
red
for
1 second
and the siren will
bleep again
, continue with the third and fourth Touch
Keys (if applicable). After teaching the final Touch Key wait 10 seconds. Finally test
that all the Touch Keys arm and disarm the security system.
Example
So for example if the PIN code is
1234
and you wish to programme in
2 Touch Keys
you would type in:
Your PIN code (siren will bleep)
Notifies security system you want to programme touch Keys
Is the number of Touch Keys that you want to programme in
Confirms you want to programme Touch Keys and will be followed by a bleep.
The press the Touch Key briefly to the receptacle at the appropriate time.
EXAMPLE ONLY.
Содержание S Series
Страница 1: ...1 ...
Страница 32: ...32 April 2022 INST011 Rev 006 ...