Part No.
Fit Kit
dB Killer
Bike
Year
Notes
s
s‘
STAY CONNECTED TO RED POWER.
Note: Retain all original parts and
fittings.
A) Unscrew heat shield bolt and
remove heat shield.
B) Undo original clamp and remove
it from the bike.
C) Unscrew the original silencer
mounting bolt.
D) Unscrew the second original
silencer mounting bolt.
E) Remove the silencer from the
bike.
F) Following the diagram above,
loosely fit the Scorpion system.
G) Check the clearance between
the pipework and the rear tyre,
this requires a minimum spacing
45mm.
H) Check the clearance between
the pipework and the suspension
linkage, this requires a spacing of
at least 20mm.
Instructions continue on the next
page:
A
B
C
D
E
Triumph Street Triple 765
2017-Current
RTR-87
Z039.10610
Z038.10043 (TYPE V)
F
H
G
Where not supplied use original fittings
Fits to S, R & RS models.
