SCOPREGA GE21-1A, Инструкция по эксплуатации

Страница: 13 / 32

13
Be careful when connecting the cable to the battery, in order not to short the battery with
conducting materials such as rings, bracelets and keys. The battery or adapter may overheat
and cause injury.
WARNING
RISK OF EXPLOSION!
Excessive pressure may result in explosions or personal injury. Before
inflating, always check the maximum inflator pressure indicated by the manufacturer.
WARNING
Do not leave the inflator running unattended. Overinflating an object could result in serious
injury.
WARNING
Check the voltage. Do not connect the 12V inflator to a 24V battery.
WARNING
THE INFLATOR CAN BE DAMAGED BY SAND, DUST OR WATER GETTING INSIDE THE INLET PORT. THIS
WILL CAUSE OVERHEATING AND WILL DAMAGE THE TURBINE. SHOULD THIS BE THE CASE, IMMEDIATELY
SWITCH THE INFLATOR OFF.
11.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE POSSIBLE SOLUTION
The inflator does
not start
The inflator does
not inflate
The ON button has not been pressed.
Battery LOW
The safety fuse is blown or
disconnected.
Hose wrong connection.
Wrong pressure setting
The device is damaged
Press the ON button.
Recharge the battery using the 110-240V
battery charger or connect the device to a
cigarette lighter socket
Insert or replace the fuse with one of
the same type (30 A).
Correctly connect the hose to the inflation
port (N5 fig. on p.3)
Correct pressure setting.
Contact a SCOPREGA service
centre.
The recommended accessories when using the inflator are the original SCOPREGA ones.
The use of any accessory not recommended for this inflator can be dangerous.
11.1 ACCESSORY WARNING