SCOPREGA GE OV 10, Инструкция по эксплуатации

Страница: 7 / 20

· Chose the correct inflation valve fitting from the supplied fittings kit.
· Put the fitting on the adaptor glued onto the hose.
·
Connect the other end of the hose to the inlet port (IN) by means of the adaptor provided.
· Make sure that the ON/OFF switch is set on (0).
· Connect the inflator to the power supply and press the ON/OFF switch (I). The deflation starts.
· Once the inflatable has been emptied, switch the inflator off immediately to prevent motor overheating.
WARNING!
Never leave the unit running unattended. Overinflation may result in serious damages.
TECHNICAL FEATURES:
GE OV 10 - 230V GE OV 10 - 120V
Supply voltage 230 Vac ~ 50 Cycles 120 Vac ~ 60 Cycles
Maximum power 1000 W
Maximum capacity 1700 l/min
Maximum pressure 250 mbar (3.6 psi)
Dimensions 150 x 160 x 170 (mm)
Weight 1.70 kg
GE OV 6 - 230V GE OV 6 - 120V
Supply voltage 230 Vac ~ 50 Cycles 120 Vac ~ 60 Cycles
Maximum power 600 W
Maximum capacity 1600 l/min
Maximum pressure 175 mbar (2.5 psi)
Dimensions 150 x 160 x 170 (mm)
Weight 1.30 kg
GE OV 4 - 230V GE OV 4 - 120V
Supply voltage 230 Vac ~ 50 Cycles 120 Vac ~ 60 Cycles
Maximum power 400 W
Maximum capacity 950 l/min
Maximum pressure 150 mbar (2.2 psi)
Dimensions 120 x 150 x 145 (mm)
Weight 0.90 kg
DEFLATION MODE