scope L2, Руководство пользователя

Страница: 33 / 37

Handheld Microscope Users Guide
29
3A. If you have a Scope-On-A-Rope, slide the
scope with the lens facing up into the metal holder
on the base of the stage. The lens should be
underneath the hole in the stage platform. 3B. If you have the L2 or the Proscope, the
XYZ stage will be different (instead of a metal
holder, a screw is used to hold the scope in
place). Locate the screw attachment on the
back of the scope and the screw on the bottom
of the stage. Place the scope face up onto
base of the stage and screw it onto the base to
secure it in place. The lens should be
underneath the hole in the stage platform.
4. Loosen the coarse focus knob again to lower
the stage so that it is just above the lens (almost
touching it). Tighten the knob to hold it in place.
5. Place the slide (or other object you’d like to
view) on the stage platform over the hole. To
focus your image, use the Z knob to move the
stage up and down. This is similar to using a fine
focus knob on a traditional microscope. If you
can’t get your sample into focus, try adjusting the
coarse focus knob. You’ll find that with practice
you will become proficient in operating the stage
controls.
6. Once the proper lighting and focus have
been achieved, use the X and Y knobs to
move your sample from right to left and
backwards and forwards, respectively.