scoole SC HT CL1 1000 WT, Инструкция по эксплуатации

Страница: 11 / 44

“HEATING" indicator will extinguish. Now, the thermostat will maintain the set temperature
periodically switching the convection heater on and off.
The convection heater may incompletely warm up the whole room, especially, in cold weather. In
this case, place the thermostat knob to a level somewhat higher than desired.
4. Switching off
Set the switch knob to the "OFF" position and disconnect the appliance from the electric mains. At
that, "POWER" indicator on the control panel will extinguish.
11
Electric convector
1. "POWER" indicator
This indicator lights up upon connection of the convector to
the electric mains.
2 . "HEATING" indicator
This indicator lights up during operation of the convector in
the heating mode.
3 . "NORMAL" indicator
This indicator lights up during operation of the convector in
comfortable mode.
4 . "TIMER" indicator
This indicator lights up upon activation of the timer function
for switching of the convector off or on.
5 . " " button
This button is used to increase the selected value.
Fig . 5
Control panel for convectors of SC HT С L1 series (Fig. 5 )
2
3
1
10
9
4
6
7
5 8
ENGLISH