SCM SC 10, Руководство пользователя

Страница: 14 / 34

13
Take the aerator out of the basin using the suitable chain; it is not necessary to unscrew
any bolts or screws. Clean the aerator with a jet of water.
Now the aerator is ready to be taken to the workshop for the revision.
Disassemble the aerator in all its parts, clean all the seal surfaces and check their integrity.
Replace the damaged parts; clean and lubricate the spherical bearings.
Replace the inferior seal bearing if the water or the mixture water-oil has penetrated into
the stator.
These operation must be carried out by specialized staff, by an authorized workshop
or at S.C.M. Tecnologie.
Check the electric motor insulation
During the general revision, you are advised to check the insulation of the motor with a
megohmmeter at 500V. The insulation has to result superior to 1 megohm whether in the
different phases or between each phase and the aerator.
Lubrication
The bearings installed on the aerators are RS or 2Z self-lubricating for
life, therefore they do not need to be periodically lubricated. It is advisable
to check their state of wear and tear.
These operation must be carried out by specialized staff, by an
authorized workshop or at S.C.M. Tecnologie.
Unscrew the oil plug, put the oil in a clean container and check it. Fill
in the oil tank with AGIP ITE 360 or equivalent.
Quantity of oil contained into the motors of the SC-SC/L aerators and submersible mixers.
Aerator model Kw Q. Litres
SC 10 SC 10/L G408T 1,5 0,33
SC 10 SC 10/L G409T 3 0,33
SC 30 SC 30/L G410T 4 1,2
SC 55-75 SC 55/L-75/L G411T 5,5 - 9 1,7
SC 100-120 SC 100/L-120/L G413T 11-15 1,5
SC 10 SC 10/L G418T 18 -30 2,85
SC 10 SC 10/L G420T 37-55 1,5
SC 10 SC 10/L G425T 80 1,5
MX-gb 19.24.4 2,4 0,45
MX-gb 19.32.4 3,2 0,45
MX-gi 30.15.6 1,5 0,33
MX-gi 30.22.6 2,2 0,33
MX-ii 40.25.8 2,5 0,5
MX-ii 40.30.8 3 0,5
MX-ii 40.50.8 5 0,5
MX-ii 60.50.12 5 1,5
MX-ii 60.75.12 7,5 1,5
MX-ii 60.100.12 10 1,5
Oil: DIELECTRIC AGIP ITE 360 OR EQUIVALENT