SCK Direct, Inc. Xwire SmartAdapter Скачать руководство пользователя страница 2

2

© 2008 SCK Direct, Inc. 229-51316 Rev F www.MySCK.com

Xwire

TM

Direct, Inc.

NOTICES

SCK Direct, Inc. is not liable for any use of product not in accor-
dance with SCK Direct, Inc.’s installation and operation
instructions.

BEFORE USING THIS EQUIPMENT, OR FOR ANY QUESTIONS ON
THE OPERATION OF THE APPLIANCE, CONSULT AND FOLLOW ALL
INSTRUCTIONS AND SAFETY WARNINGS FOUND IN THE APPLI-
ANCE

OPERATOR’S

MANUAL

SUPPLIED

FROM

THE

MANUFACTURER OF THE APPLIANCE.

CLEANING

Using a clean damp cloth, wipe down the products when neces-
sary using a commercial quality foodservice-approved detergent.
DO NOT IMMERSE.

NEVER use chemical or abrasive cleaners on SCK products.

TOOLS REQUIRED FOR INSTALLATION

Flat screwdriver (for SmartBezel)

Pliers (for SmartBezel)

Phillips screwdriver (for SmartAdapter)

Drill bit: 3/16” if using anchor. #50 if installing into metal (for
SmartAdapter)

Changes or modifications not expressly
approved by SCK Direct, Inc. could void the
manufacturer’s

warranty

and

the

user's

authority to operate the equipment.

NOTE

: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency ener-
gy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and
receiver.

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

Consult the dealer for help.

TABLE OF CONTENTS

Installation: Wireless SmartGateway Adapter . . . . . . . . . . . . . .3

Installation: SmartBezel Adapter

for FAST VC-210 & FAST EM-99 Controllers . . . . . . . . .4

Installation: Universal SmartAdapter

for FAST TRACKER Timers . . . . . . . . . . . . . . . . . . . . . . . . . .5

Installation: Universal SmartAdapter

for Fryers & Ovens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Light Bar and LED Status Charts . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Changing the Default PAN ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Содержание Xwire SmartAdapter









Отзывы: