Explanation of Controls
1) 0-9,
“
*
”
,
“
#
”
:
press to dial telephone numbers.
2) FLASH key:
press to
generate a 600ms (0.6 seconds)
“hook flash.”
3) REDIAL key:
press to
redial the last number dialed.
4) IN USE LED Indicator
– lights when the telephone is
“off-hook.”
5) Ringer Volume Switch
– set to
H
or
L
to adjust the
ringer level to high or low volume as desired. This
switch is located on the rear of the telephone.
6) P/T Switch:
set to select pulse/tone dialing mode. This
switch is located on the rear of the telephone.
7) VOL key:
press to adjust volume level for handset
receiver.
Using your Aegis 8128 telephone
To place a call:
Lift the handset, then dial the telephone
number.
To answer a call:
Lift the handset
.
Solutions for voice, data, and video
1212 E. University Ave. Urbana, IL 61802
Toll-Free 800-451-4035 | Phone 217-384-6041 | Fax 217-384-6501
[email protected] | www.scitecinc.com
Aegis 8128
Telephone User Guide
Unpacking your Aegis 8128 telephone
This package contains the following items:
•
Telephone
base
unit
•
Handset
•
Coiled
handset
cord
•
Straight
line
cord
•
This
user
guide
Installation
Insert one end of the coiled handset cord into the jack on
the LEFT SIDE of the base unit. Insert the other end of the
coiled handset cord into the jack on the bottom end of the
handset. Place the handset in its cradle to depress the hook
switch. Connect the straight line cord between the wall jack
and line jack located on the rear of the telephone base unit.
Lift the handset. A dial tone should be heard in the receiver.
