Scireq flexivent, Руководство пользователя, Страница: 51 / 86

49
16)
When the software prompts you to start recording data, select
Yes
if you want to record
data streams for all input channels (e.g. cylinder pressure). Select
No
if you prefer not to
record data streams (i.e. if your primary interest is dataset outcomes).
17)
Connect a subject to the Y-tubing with the same cannula that was used during calibration.
18)
Execute perturbation(s) to generate datasets, either by double-clicking the perturbation
name in the perturbation docker or by typing the hotkey for the perturbation. Refer to the
flexiVent-Specific Features
section of the
flexiWare
user manual for perturbation settings
and outcomes.
To automate the execution of perturbations, use a script. There may be scripts pre-
loaded into the template you have selected.
19)
After you have completed your experiment involving the current subject, stop ventilation ; if
you have been recording data streams, stop recording .
Once ventilation is stopped, understand that your subject is no longer receiving air.
Data from the present experimentation session may be reviewed immediately. To
review all data contained within the study, you must use the Review & Reporting
module of
flexiWare software.
20)
Remove the subject.
21)
Proceed to either adding another subject to the experimentation session or cleaning the
expiratory line, after which you may end the experimentation session.
To add another subject to the experimentation session, click
Edit Site Assignment
from
the
Edit
menu. You may need to define another subject to proceed (per Steps 8 through
11), then you will be prompted to repeat steps 13 through 20 as many times as needed
until you are finished with the experimentation session.
To clean the expiratory line and then exit the experimentation session, follow the steps
detailed in section
5.2.2.
To end the experimentation session, go to the File Menu and select Close Session .