SCION
xD
2012–
TVIP V5
CHECKLIST – these points
MUST
be checked to ensure a quality installation.
SCION SECURITY
Issue: A 10/18/11
Accessory Function Checks
Perform
Look For
1
Press and release the remote control’s lock
button to start the system’s arming process.
The turn signal lights flash once.
All doors lock.
The security LED lights up.
2
Wait 30 seconds.
Security LED starts flashing; the system is now armed.
3
Press and release the remote control’s
unlock button to disarm the system.
The turn signal lights flash twice.
The driver’s door unlocks.
The Security LED stops flashing.
Open the driver’s door, insert the key into the ignition switch and turn it to “ON.” Roll down all the windows,
remove the key and exit the vehicle.
4
Arm and disarm the system with the remote
again, then wait 30 seconds.
The doors automatically relock.
The system automatically starts the arming process.
5
Press and release the remote control’s
unlock button again to stop the arming
process.
Refer to step 3
6
Insert the key into the driver’s door key
cylinder and turn it toward the front of the
vehicle to start the arming process.
All doors lock.
The Security LED lights up.
7
Wait 30 seconds.
Security LED starts flashing; the system is now armed.
8
Reach inside and manually unlock the
driver’s door to trigger an alarm.
The driver’s door automatically relocks.
The horn sounds repeatedly.
The headlights flash repeatedly.
The turn signal lights flash repeatedly.
The Security LED lights up.
9
Manually unlock the driver’s door again and
hold it unlocked, open the door, then sit in
the driver’s seat.
The driver’s door lock attempts to lock repeatedly.
The horn continues to sound repeatedly.
The headlights and turn signal lights continue flashing.
The Security LED remains on.
10
Press and release the remote control’s
unlock button to disarm the system.
The horn stops sounding.
All the lights stop flashing and/or turn off.
The Security LED turns off.
Take the remote and then exit the vehicle.
11
With the door open, press the lock switch
on the door to lock the doors, then close the
door to start the system’s arming process.
All doors lock.
The Security LED lights up.
12
Wait 30 seconds.
Security LED starts flashing; the system is now armed.
Page 20 of 23 pages
