PRO-6000B Series Operating Manual
Issue 1.1V – 17/06/2008
- 9 -
Scion Tech Ltd
- 9 -
- 9 -
Bar a room from individual channels
1.
Click the “Bar” icon. If the “Force” icon was previously selected, the “Bar” icon
will change colour to red. Click the “Bar” icon again, the icon will now change to
violet.
2.
Click on a “selection” icon to bar a room, the “selection” icon will change to red.
The room is now bared from the selected channel.
3.
Repeat this operation for baring more channels.
Bar a room from all Channels
1.
Click the “Bar” icon. If the “Force” icon was previously selected, the “Bar” icon
will change colour to red. Click the “Bar” icon again, the icon will now change to
violet.
2.
Click the “Clear” icon under the room you wish to bar. All the “selection “ icons
will change to red indicating all channels are bared.
Releasing a bared channel
1.
Click the “Bar” icon. If the “Force” icon was previously selected, the “Bar” icon
will change colour to red. Click the “Bar” icon again, the icon will now change to
violet.
2.
Click on a “Selection” icon to release the bared channel. The “Selection” icon
will change to green.
3.
Repeat this operation for releasing more channels.
Releasing all channels
1.
Click the “Bar” icon. If the “Force” icon was previously selected, the “Bar” icon
will change colour to red. Click the “Bar” icon again, the icon will now change to
violet.
2.
Click the “Set” icon under the room you wish to release all channels. All the
“Selection” icons will change to green indicating all channels are now released.
Force a room to a channel
1.
Click the “Force” icon. If the “Bar” icon was previously selected, the “Force”
icon will change colour to orange. Click the “Force” icon again, the icon will
now change to yellow.
2.
Click on a “selection” icon to force a room, the “selection” icon will change to
orange. The room is forced to the selected channel.
PRO-1000 16 x 16 Switch
Scion Technology Ltd
[email protected]
Tel: +44 (0) 118 9817 575
