PRO-6000B Series Operating Manual
Issue 1.1V – 17/06/2008
- 6 -
Scion Tech Ltd
- 6 -
- 6 -
PRO-6000B Input
Connections
01
DC Power
12Volt dc @ 2.5amp
02
RS232 Interface
(IN) 9-way D Socket, (OUT) 9-way D Plug
03
Auxiliary
2 x J45 Sockets
04
Video Inputs
9 x RCA Phono Sockets
05
Left/Mono Audio
9 x RCA Phono Sockets
06
Right Audio
4 x RCA Phono Sockets
07
CCTV / Comp. Video
2 x RCA Phono Sockets
08
User Interface
6 x RJ45 Sockets
User Interface Connections
The PRO-6000B has six RJ45 user interface connectors mounted on the front of the unit.
Each connector has two LED indicators for displaying the status of each user. The green
LED indicated power and the amber indicates a fault when pulsing on and off.
Green LED
On initial power up the green LED’s will illuminate and remain on to indicate power to
the port.
Amber LED
On initial power up the PRO-6000B will perform a system check on each port starting
with port 1. The amber LED’s will illuminate one at a time until the system check is
complete. Should a wrong or faulty CAT5 cable be inserted or in the event of receiver
failure, the PRO-6000B will momentarily turn of the faulty port and re-apply power after
2 seconds. This creates a pulsing effect on the amber LED. The pulsing will continue until
the CAT5 cable is removed or the faulty receiver has been replaced.
NOTE
Leaving the system with pulsing amber LED’s for a long period will result in damage to
the PRO-6000B.
RJ45 Plug
Wire Colour
Signal
RJ45 Plug
Wire Colour
Signal
Pin 1
White/Orange
Left Audio -
Pin 5
White/Blue
Video -
Pin 2
Orange/White
Left Audio +
Pin 6
Green/White
Right Audio +
Pin 3
White/Green
Right Audio -
Pin 7
White/Brown
Volts -
Pin 4
Blue/White
Video +
Pin 8
Brown/White
Volts +
