9
SK-O（L）330- Pro Orbital and Linear Digital Shaker SK-O（L）180- Pro Orbital and Linear Digital Shaker
10.Maintenance and cleaning
Use and maintain the instrument in right way to keep it in
good operating state in order to lengthen its life time and
avoid the damage to the instrument. Only use the cleaning
agents which have been approved by manufacturer to clean
the instrument.
Only use cleanser that we advised as below
Dyes
Isopropyl alcohol
Construction materials
Water containing tenside /
isopropyl alcohol
Cosmetics
Water containing tenside /
isopropyl alcohol
Foodstuffs
Water containing tenside
Fuels
Water containing tenside
For materials which are not listed, please request
information from manufacturer or your supplier. Before
using another than the recommended method for cleaning
or decontamination, the user must ascertain that this method
does not destroy the instrument. Wear the proper protective
gloves during cleaning of the instrument.
Note:
• Electrical instrument may not be placed in the
cleansing agent for the purpose of cleaning.
• The instrument must be cleaned and put it into
the initial packaging carton before sending to
service for repair, avoiding the contamination of
hazardous.
• Switch OFF the instrument and put it in the
dry, clean, stable place at room temperature in
long-term disuse.
11.Associated standards and regulations
Construction in accordance with the following safety
standards
EN 61010-1
UL 3101-1
CAN/CSA C22.2(1010-1)
EN 61010-2-10
Construction in accordance with the following EMC
standards
EN 61326-1
